Issue: Percentage range of material child of a semi-component is too large
The allowable percentage range for a material child of a semi-component is 20. Per IMDS Recommendation 001*, Rule 4.3.2.B:
If the portion type “range” is selected, for semi-components or materials that are attached to a semi-component, the following maximum portion range applies:
| Portion: from X % to Y % | Maximum M = Y % – X % |
| 0 < X ≤ 100 | M ≤ 20 |
Example: the Range 30% to 70% is not allowed because the M value would be 40 in this case (70-30) and the maximum M allowed is 20%. For semi-components and materials in MDSs published by the IMDS Steering Committee (Supplier: IMDS-Committee, ID 423; IMDS-Committee/ILI Metals, ID 18986 or Stahl und Eisen Liste, ID 313), this rule does not apply, and datasheets containing those must not be rejected on this rule.
Your material’s percentage range is greater than 20.
Action Required:
Review the percentage range, revise and resubmit.
*IMDS Recommendations may be downloaded from inside IMDS at Help > Recommendation.