Issue: Application 60 used and part is NOT marked as a Legacy Spare Part
| Application Code Language | ELV Annex II Exemption Language, Scope & Expiry Date |
| 8(h) – Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies | Language: Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies with a chip size of at least 1 cm2 of projection area and a nominal current density of at least 1 A/mm2 of silicon chip area Scope and Expiry Date: Vehicles type-approved before 1 January 2016 and spare parts for these vehicles |
Action Required:
The exemption expiry date is earlier than the cut-off date in the review email you received. This means that this application code is not valid for any parts for your customer. Contact your customer to discuss solution to this issue.
If you incorrectly marked this part as a Legacy Spare Part, then it is a new part. Application Code 60 cannot be used for new parts. Contact your customer to discuss a solution to this issue.
If you incorrectly selected Application Code 60, then revise the part as appropriate and resubmit to your customer.