Issue: Application 60 used and part is NOT marked as a Legacy Spare Part
| Application Code Language | ELV Annex II Exemption Language including Scope & Expiry Date |
| 8(h) – Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies | Language: Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies with a chip size of at least 1 cm2 of projection area and a nominal current density of at least 1 A/mm2 of silicon chip area Scope and Expiry Date: Vehicles type-approved before 1 January 2016 and spare parts for these vehicles |
Action Required:
This part is NOT marked as a Legacy Spare Part, therefore it is a new part. Application Code 60 cannot be used for new parts. Contact your customer to discuss a solution to this issue.
If this part is a Legacy Spare Part, check the Legacy Spare Part checkbox on the Recipient Data tab and resubmit the part.
If you incorrectly selected Application Code 60, then revise the part as appropriate and resubmit to your customer. If there is no appropriate application code for the use of lead (Pb) in this part, contact your customer to discuss a solution to this issue.