Issue: Application code 1, 2, 7, 13, 14, 16, 19, 22, 23, 26, 30, 40, 41, 42, 58 or 59 is used and part is NOT a Legacy Spare Part
The above listed application codes are hidden or inactive in IMDS. They should not be present in current IMDS submissions. They would be present only if old data was pulled forward into a new IMDS submission.
| Code | Status | Application Code Language | Basic Substance Group to Which Code Applies |
| 1 | Hidden | 1 – Alloying element in steel for machining purposes or galvanised steel | |
| 2 | Hidden | 2 – Alloying element in aluminium for machining purposes | |
| 4 | Inactive | Alloying element in lead-bronze bearing shells and bushes | |
| 7 | Hidden | 5 – Battery | Lead or its compounds |
| 13 | Inactive | Solder in electronic circuit boards and other electric applications | Lead or its compounds |
| 14 | Inactive | Copper in brake linings | Lead or its compounds |
| 16 | Inactive | Electrical components which contain lead in a glass or ceramic matrix compound except glass in bulbs and glaze of spark plugs | Lead or its compounds |
| 19 | Inactive | Impurity (not intentionally added) | |
| 22 | Inactive | 14 – Absorption refrigerators in motorcaravans | Chromium (VI)-salts |
| 23 | Inactive | Impurity (not intentionally added) | Chromium (VI)-salts |
| 26 | Inactive | Impurity (not intentionally added) | Mercury or its compounds |
| 30 | Inactive | Impurity (not intentionally added) | Cadmium or its compounds |
| 40 | Inactive | Not applicable | Polycyclic aromatic hydrocarbons |
| 41 | Inactive | PAH in lubricating oil | Polycyclic aromatic hydrocarbons |
| 42 | Inactive | Alloying element in bearing shells and bushes | |
| 58 | Inactive | 8(f) – Lead in compliant pin connector systems | Lead or its compounds |
| 59 | inactive | 8(g) – Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages | Lead or its compounds |
Action Required:
This part is NOT marked as a Legacy Spare Part, therefore it is a new part. The above listed application codes cannot be used for new parts. Contact your customer to discuss a solution to this issue.
If this part is a Legacy Spare Part, check the Legacy Spare Part checkbox on the Recipient Data tab and resubmit the part.